Ameri-King AK-451-P-ELT - Manual (Page 13)

13
SECTION 9 - WARRANTY AND REPAIR SERVICE
9.1
LIMITED WARRANTY
• All equipments manufactured by Ameri-King Corp. are guaranteed against defective materials and workmanship for a period
of two years.
• Any equipment found to be defective due to material and workmanship during this limited warranty will be repaired and put
in original manufactured operating condition.
• An option of extended third and fourth year limited warranty becomes valid at the end of this second year, which will warrant
to the original owner.
• This Ameri-King Corp. warranty is void unless the Warranty Registration Card is filled out and returned to Ameri-King
Corp. within 15 days after original installation.
• Ameri-King Corp.’s liability under this warranty is limited to servicing, repairing, replacing or adjusting any equipment
returned prepaid to the factory by express written or oral authorization for that purpose and to repair or replace defective parts
thereof. This limited warranty does not include any damage caused by the leakage of batteries. Repaired equipment will be
returned to the equipment user freight pre-paid. Shipping charge will be paid one way only by Ameri-King Corp.
• Upon discovery of a condition believed to be caused by a defect in manufacturing, Ameri-King Corp. without prior
authorization. Any equipment returned to Ameri-King Corp. without prior authorization. Any equipment returned to Ameri-
King Corp. should be accompanied by a failure report, in writing, giving full particulars in support of the claim.
• This limited warranty does not cover or apply to any of the followings, including: misuses of the equipment; installation or
operation not in accordance with factory instructions; accidences or negligent damage; alterations of any manner; repair by
other factory; changes in calibration occurring as a result of normal use of equipment; the cost of labor, material, or other
expense incidental to the repair, installation, removal from the aircraft or replacement of the equipment; damaged during
shipment or installation; any personal injuries or damage to property resulting from the installation or the operation of the
equipment user assumes the risks of all such injuries or damage. In such cases, the repair will be billed at cost. An estimate
will be submitted for approval before repair is initiated.
• Any equipment that is returned for warranty and found not to be defective shall be charged a minimum handling and service
charge and returned C.O.D.
• No warranty will be activated for Ameri-King Corp. products unless the installation is approved by an FAA Certified
Installer and the warranty card is completed by the supplying dealer or upon receipt by Ameri-King Corp. of form(s) 337 or
8130-().
THE IMPLIED WARRANTY AND ALL OTHER IMPLIED WARRANTIES ARE HEREBY EXCULED. AMERI-KING
CORP. MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER EXPRESSED OR
IMPLIED, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
AMERI-KING CORP.’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASED PRICE OF THE
PRODUCT. IN NO EVENT SHALL AMERI-KING CORP. BE LIABLE FOR ANY DAMAGES OF ANY NATURE
ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED IN CONTRACT, TORT, STRICT
LIABILITY OR OTHERWISE.
9.2 REPAIR
SERVICE
All equipments manufactured by Ameri-King Corp. must be repaired at the facility of Ameri-King Corp.
The entire repair service shall be performed and completed within 3 days upon repairing estimate is approved by equipment user or
installation dealer.
9.3
FACTORY COMPREHENSIVE TEST SERVICE
Factory Comprehensive Test Service including RF Peak Effective Radiated Power, Operating Carrier Frequency, Modulation
Characteristics, Duty Cycles and Digital Coding Message are available. There is a service charge for this service. All equipments
returned for Factory Comprehensive Test Service must be sent freight prepaid.