Ameri-King АК-451-Series - Manual (Page 22)

43
FAR 91.207(d); 91.409 and 43
Appendix D.
Transport Canada Civil Aviation
Part V Airworthiness Standards
Chapter 551.104 (d) (1) (VI)
Battery capacity test procedures
(Tests are to be performed every
year)
1.4.1
ELT Main Battery
Replacement instructions,
Step 2, Battery Voltage Test.
FAR 91.207(d); 91.409 and 43
Appendix D.
Transport Canada Civil Aviation
Part V Airworthiness Standards
Chapter 551.104 (d) (1) (VI)
Functional Test Procedures
These functional test procedures are
recommended by Ameri-King to be
performed every (1-2) months
2.3.1 Main
Switch
ON/OFF/ARM Operation:
2.3.2 Transmitter
ID
Programming and Self-Test
2.3.3
System Integration Test
2.3.4
Green ON Lights and
Buzzer Sound Functions
2.3.5 Transmitter Functional
Test For ELT-(S) only
2.3.5.1 Main Switch ON / OFF /
SELF TEST Operation
2.3.5.2 Transmitter Self-Test
FAR 91.207(d); 91.409 and 43
Appendix D.
Procedures Necessary To Accomplish
The Performance Tests Specified In
Chapter 571
Appendix G
(A) Corrosion Inspection
(Inspections are to be performed
every year)
3.1.2 Corrosion Inspection For
Coaxial Cable
3.1.3 Corrosion Inspection For
Remote Wiring Modular Cable
44
(B) Operational Testing
The periodicity of operational checks
is at the operator's discretion, but the
check shall only be conducted during
the first five minutes of any UTC.
These test procedures are
recommended by Ameri-King to be
performed every
(1-2) months
3.1.6 Operational Test
3.1.7.1 G-Switch
Check
3.1.7.2 Antenna
Check
3.1.8* Verification
of Digital
Message
3.1.9 Verification
of
Registration
3.1.10* Verification of
ELT/GPS interface (if
equipped)
(C) Performance Testing
These Tests are required for
Canadian compliance only
(Tests are to be performed every
year)
3.2.1 Regular
Periodic
Maintenance Test
3.2.2** Power Output Test
(20 +/-3) dBm at
121.5 & 243 MHz)
(35 +4/-0)dBm at 406.028 MHz)
3.2.3* Frequency
Test
121.5 MHz ± 6.075 KHz
243 MHz ± 12.150 KHz
406.028 MHz +/- 1 KHz
3.2.3.4***
Current Draw Tests
3.2.4 Audio
Modulation
3.2.5 Transmitter
Functional
Test
3.2.6 Performance
Test
Marking and Log Book Entry