Cobra Electronics NAVONE 5000 - Manual (Page 20)

Bluetooth
20
BLUETOOTH
The NAV ONE can function as a speaker phone
for many Bluetooth enabled cell phones.
The first step is to set up a cell phone with the NAV ONE.
1. On the NAV ONE, go to Bluetooth Setup with the sequence
Main Menu S Settings S Bluetooth.
2. Press the Yes button to enable the NAV ONE to be
discovered by a cell phone.
3. Set the cell phone for Bluetooth pairing according
to your cell phone instructions.
4. Have your phone “discover” the Nav One.
5. After the two devices are connected, follow the on-screen
instructions and enter the password shown on the Nav One
screen into your phone when registered.
The Main Menu will now display a Phone button
and the Bluetooth status icon will be added to
the status bar at the top of the Map screens.
All future connections will be controlled by the
cell phone.
NOTE
Some cell phones may
have a variety of Bluetooth
that is incompatible with
that in the NAV ONE.
If pairing does not occur,
call Cobra customer support
for assistance.
Whenever a device is paired with the NAV ONE, the
Main Menu screen changes to that shown here.
Calls are easy to initiate:
1. Press the Phone button.
2. Dial the number using
the numeric pad presented
on the screen.
3. Press the Send button.
10474 NAVONE 5000 VD_PH1.2.qxd 7/25/07 2:42 PM Page 20