AOC LE23H062 - Manual (Page 10)

Follow these steps to finish installing the wall mounting arm:
75mmx75mm VESA high hole(n=4),M4,pitch=0.7mm,deep=10mm screw mount
-ing kit not included.
Due to safety concerns,if the VESA mounting kit is purchased separately please
make sure the mountingkit is UL-Listed,and replaceable only by service personn
-el.
NOTE
1. Place the wall mounting arm onto the back of the TV.
2. Insert the 4 screws into the holes and tighten.Line up the holes of the arm
with the holes in the back of the TV.
3. Reconnect the cables.Refer to the user’s manual that came with the optional
wall mounting arm forinstuctions on attaching it to the wall.
English
2