AOC LE23H062 - Manual (Page 22)

English
2.3 Using the TV
2.3.1
Turning the TV On and Off
1 Press on the control panel or remote control. The power LED indicator on
the TV changes from amber to blue, indicating that the TV is on.
2 Press again. The power LED changes from blue to amber, indicating that
the TV is off.
2.3.2 Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press OK to confirm.
2.3.3 Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2 Select Air/Cable to set the signal source. (Air or Cable, default is Cable)
3 Select Auto Scan. Three options are available: Scan all channels, Digital
channel only, and Analog channel only.
• To search for digital channels only, select
Digital channel only.
• To search for analog channels only, select Analog channel only.
• To search for both, select Scan all channels.
4 Press on the remote control to run the channel search.
2.3.4 Selecting Channels
• Press CHS on the control panel or on the remote control to increase the
channel number.
• Press CHT on the control panel or on the remote control to decrease the
channel number.
• Enter the specific channel number by pressing the number buttons on the
remote control.
CH
CH
14
English