Canon LV-7105E/D78-5133 - Manual (Page 47)

4.5 Polarized Glass-in Ass’y Disassembly
1. Remove the cabinet top, front, main and component boards following to “Mechanical
Disassemblies”.
2. Remove each screw and take the each polarized glass-in ass’y off upward.
3. Release 2 hooks and remove the polarized glass-in.
4.6 Polarized Glass-out Ass’y Disassembly
1. Remove the cabinet top, front and main boards following to “Mechanical
Disassemblies”.
2. Remove 4 screws by using the 2.0 mm hex driver and take the LCD Panel/Prism
ass’y off upward from the optical unit.
3. Remove each screw and take the each polarized glass-out off upward.
Part 2: Repair Information
2-13
Hook
Polarized Glass-In
* Mount the polarized glass as the
surface attached the phase sheet
comes to the prism side.
Phase Sheet
Note:
Do not replace the LCD
panel separately
otherwise it can not
obtain proper picture.
Note:
Each polarized glasses
are defferent parts.
Fig. 2-20
Fig. 2-21
Polarized Glass-Out
LCD Panel/Prism
Ass’y
LCD Panel/Prism
Ass’y
* Mount the polarized glass as the
surface attached the phase sheet
comes to the LCD panel side.
LCD Panel