Avlink MRM-602P User Manual
Page 30
M
M
M
R
R
R
M
M
M
-
-
-
6
6
6
0
0
0
2
2
2
P
P
P
29
Audio Tab: Click the “Audio” tab to show the audio related configuration window.
Video Tab: Click the “Video” tab to show the video related configuration window.
Disconnect: To disable the connections. After you had configured the connection
between input and output ports, you can click this button to disable the connections
Select all: Click this button to select all output ports including HDMI OUT, VGA OUT and
AUDIO OUT.
Video check box: Used for video configurations.
Audio check box: Used for audio configurations.
Scan: To search the device controlled by the AV Matrix Application configuration. When
the device name located on the left of main configuration window is empty, you can click
the Scan to research and update the device ID and Name and other related information.
End the Scan function by pressing the Scan again during scanning process. And the left
of main configuration window will show you the detected information presently.
Options: Allows you to configure the Port number and Baud rate.
Exit: Click this button to exit the configuration window.
For more information and operations, please refer to next chapters.