Avlink YX-1024 - Manual (Page 8)

YX-1024 Matrix Switching System—User Manual
7
5.0.2 Operation
LED Status:
Power LED (Green): ‘ON’ is power on. ‘OFF’ is power off.
IN1 LED (Green): ON is INPUT 1 signal ready. OFF is INPUT 1 signal fail.
IN2 LED (Red): ON is INPUT 2 signal ready. OFF is INPUT 2 signal fail.
OUT 1~4 LED (Green): ON is selected IN1.
(Red): ON is selected IN2.
(Orange): Flash is ready for INPUT selection.
5.0.3 Key Operation
A. Select a OUTPUT port to each INPUT.
1. Press OUTPUT# bottom that you want to select.
2. The OUTPUT# LED will flash (Orange)
3. Press INPUT# bottom (IN1 or IN2)
4. The OUTPUT# LED is Green on, if you select IN1.
IF you select IN2, the OUTPUT# LED will be Red on.
B. Turn off a OUTPUT port.
1. Press OUTPUT# bottom that you want to turn off.
2. The OUTPUT# LED will flash (Orange)
3. Press OFF bottom.
4. The OUTPUT# LED is off.
C. Select all OUTPUT ports to each INPUT.
1. Press ‘ALL’ bottom for selection 1~4 OUPUT ports.
2. All OUTPUT LEDs will flash (Orange).
3. Press INPUT# bottom (IN1 or IN2)
4. The ALL OUTPUT port LEDs is Green on, if you select IN1.
IF you select IN2, the ALL OUTPUT LEDs will be Red on.
D. Turn off ALL OUTPUT ports.
1. Press ‘ALL’ bottom for selection 1~4 OUTPUT ports.
2. All OUTPUT LEDs will flash (Orange).
3. Press ‘OFF’ bottom.
4. The ALL OUTPUT port LEDs is OFF.