Avlink PG-Y1 - Manual (Page 12)

11
„
“▲”: Switch the Pattern mode with up page. (refer to
Appendix B: Pattern chart)
„
“▼”: Switch the Pattern mode with down page. (refer to
Appendix B: Pattern chart)
„
“ ”: Confirm the changed value. (After press the “ ”
indicated key the screen will be showed as below: )
P02 Blinking mode configuration:
Press the Set indicated key to enter the black and white
setting configuration as below (you can set the black and
white blinking frequency (frames/value) here):
„
“▲”: Increase the BLK or WHT blinking frequency value.
The value is up to 255.
„
“▼”: Decrease the BLK or WHT blinking frequency
value.
„
“ ▲ ”,” ▼ ”: Switch between BLK and WHT options.
„
“ ”: Confirm the changed value.
) 1. Both
BLK/WHT are the condensations for
Black/White .
2. The bigger Value is set, the lower blinking frequency
is supported.
3. When the value is 001, the “▼” indicated key is no
any function.