Chapter 1 introduction – Avlink PG-Y1 User Manual
Page 3
2
Chapter 1 Introduction
PG-Y1 is a test pattern generator with RCA (YPbPr)
connectors designed to be a useful tool for the new
generation of DTV (digital TV) products. PG-Y1 supports up
to 7 resolutions and 34 patterns for you to test and calibrate
a digital monitor. Further, it also can improve the quality of
HDTV monitor with side by side comparisons. Through the
friendly interface and smart design, not only you can easy to
use the PG-Y1 but also you can reduce your test
expenditure.
Caution
To avoid and minimize the risk of damage to PG-Y1, please
pay attention to the safety instructions even though the
PG-Y1 had been tested for conformance to safety
requirements and certified for international using.
Follow all instructions marked on the device during using.
Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
Provide proper ventilation and air circulation and do not
use near water.
It is better to keep it in a dry environment.
Only using the power adapter and connection cables that
are supported with the device.
After purchasing and before using the PG-Y1 first time,
please charge it continuously for more than 16 hours.
It is better to charge the battery when the battery power
indicator becomes low.
The PG-Y1 will save the last setting values automatically.
Do not use liquid or aerosol cleaners to clean the device.
Always unplug the power to the device before cleaning.
1.1 Package Contents
1 HDTV Component Video pattern generator PG-Y1
1 power adapter with DC 12V 1.25A
4 replaceable plugs (for USA, UK, Europe and Australia
DC plugs.)
1 user manual
1 YPbPr 1.2M cable
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missing or damaged.