Avlink PG-MT1 - Manual

PATTERN
GENERATOR
USER MANUAL V1.1
PG-MT1
Package Contents-
ƒ 1 Multi-format pattern generator PG-MT1
ƒ 1 power adapter DC 12V
ƒ 1 user manual
ƒ 1 HDMI 1.2M cable
ƒ 1 YPbPr 1.2M cable
ƒ 2 rack rails, 6 screws
Any thing missed, please contact with your vendor.
Introduction
Through the use of Multi-format pattern generator
PG-MT1, you are able to use 55 timings and 31 build-in
patterns; PG-MT1 also supports to play 24-bits BMP file in
SD/SDHC card, user can store customized *.BMP file in a
simple SD card for different test needing.
PG-MT11 is ideal for:
ƒ
TV / Monitor production line
ƒ HDMI image input devices
Features
ƒ Support Multi-format video output. (HDMI, VGA, YPbPr,
CVBS, S-Video)
ƒ Intelligent functionality.
ƒ HDMI & HDCP & DVI compliant
ƒ Support total 51 timings. (up to UXGA/1080p)
ƒ Low cost.
ƒ Single interface easily use.
ƒ Provide total 31 patterns, Include: Color bar, Gray, Grid,
Block…
ƒ With SD/SDHC card reader to display *.BMP file
(customized by user) in stored in SD/SDHC card.
ƒ By 20x2 Character LCM and key buttons, easily control.
ƒ Support analog and digital audio out: 48KHz sample
rate, 1KHz tone.
Specifications
Function PG-MT1
HDMI Output Connector 1 HDMI Type A
VGA Output Connector 1 HD-15 Female
YPbPr Output Connector 3 BNC
CVBS Output Connector 1 BNC
S-Video Output Connector 1 mini-DIN 4 Female
Select Switch 6
LCD Module:
20*2 Character Display
With Backlight
1
Background: Blue
Font: White
Max. Resolution UXGA/1080p
Highest TMDS Frequency 225 MHz
Power Adapter (Min.) DC 12V with lock
Housing Metal
Weight 1885g
Dimensions (LxWxH) 384x173x45mm
FRONT VIEW
1 2 3 4
1. SD/SDHC card
2. LCD Module: 20*2 Character Display
3. Function Keys
4. LED: Indicate current selected resolution support video
format.
ON: support
OFF: not support
-1-
REAR VIEW
1 2 3 4 5 6 7 8 9 10
1. Power Jack.
2. USB for firmware upgrade.
3. DIP setting for USB firmware upgrade.
4. Video out: HDMI
5. Video out: S-Video
6. Video out: CVBS
7. Video out: YPbPr
8. Video out: VGA
9. Audio out: Analog
10. Audio out: Digital (S/PDIF)
Installation
Before the installation, making sure the PG-MT1 and
the monitor are turning off.
1. Insert the external AC adaptor into AC outlet, Connect
the power cord to PG-MT1 for charging.
2. Switch off the monitor.
3. Connect the video cable between the PG-MT1 and
monitor.
4. Switch on the power of the monitor.
Operation
A. “Main” function window
1. After power on the PG-MT1, the LCM will display above
message.
2. Factory preset starting value:
P07 1920x1080P@60
P07 Î Pattern 07
1920x1080P@60 Î Resolution 1920X1080
P: progressive; i: interlaced
@60 Î Refresh rate 60Hz
3. The second line message on the LCM shows four main
setting function of PG-MT1.
“Tim”: Select the output timing (resolution).
Like: 800x600, 1024x768, 1080P60…etc
-2-
Ｐ０７：１９２０ｘ１０８０Ｐ＠６０
［Ｔｉｍ］Ｐｔｎ Ｉｎｆｏ Ｓｅｔｕｐ