Avlink PG-MT1 - Manual (Page 2)

“Ptn”: Select the output pattern.
Like: Color bar, Gray, Grid…etc
“Info”: Display information includes timing info.
Like: H_act, H_total, H_frontporch…etc
“Setup”: select various setting function.
Like: audio on/off, DVI mode switch, Picture shift
function…etc
Operation in “Main window”
“◄”, “►” button: Select another function, and the selected
function is with [ ].
“Enter” button:Entering the selected function with [ ].
B.“Timing” function window
Users can select different resolution and refresh rate here.
Path: Main -> Tim (Timing)
Operation in “Timing” window
“◄”, “►” button: Switch the selection between the
“resolution” and “refresh rate” with [ ].
“▲”, “▼” button: Change the value “
“ : Change the
Video output timing.
“Menu/Back” button:Back to the “Main” function window
C. “Pattern” function window
Users can select different video pattern here for various
test environment.
Path: Main -> Ptn (Pattern)
Operation in “Pattern” window
“▲”, “▼” button: Change the Pattern number “
“ :
Output the selected Pattern.
“Menu/Back” button:Back to the “Main” function window
*** (Pattern No.00): select Picture file in SD card In
“Pattern ” window use “▲”, “▼” button to select no.0
(SD_card).
And press “
“ button to enter the directory of the
SD_card.
-3-
LCM message in P00_SD
C-1. “Pattern _SD select dir“ function window
*** PG-MT1 can only support SD/SDHC card with
“FAT32”
file structure.
Path: Main -> Tim (Timing) -> SD (Pattern No.00)
Operation in “SD select DIR” window
“▲”, “▼”: Change the other directory in SD card “
“ :
ented the selected directory
“ ▲ ”: back to the upper level directory
“Menu/Back” button:Back to the “Pattern” function window
“►”: enter the sub-directory
*** If selected directory have sub-directory inside, then it
will show “►” icon.
C-2. “Pattern SD_select file“ function window
*** PG-MT1 can only support *.bmp file format with
24-bit, uncompressed
.
Path: Main -> Tim (Timing) -> SD (Pattern No.00) -> Select
directory
Operation in “SD select File” window
“▲”, “▼”: Change other *.bmp file to output.
“ ▲ ”, “►”: Change the resolution and refresh rate of the
selected picture file.
“Menu/Back” button:Back to the “SD select dir” function
window
“
“ : Output the picture with specified resolution and
refresh rate.
-4-
D. “Pattern SD_slide show “function window
PG-MT1 can display all *.bmp in the same directory as
slide periodically. And the time to change another *bmp file
can be setting by the user.
*** All “.bmp” files in “slidexxx” directory must have the same
resolution.
That means if you want to slide show 10 pictures ( *.bmp file, and
the resolution are all the same, like: 800x600, 1280x1024), you
can create a directory like “slide_800x600” , and then copy these
10 .bmp in the directory.
When the user enter the directory in SD card with dir name
“slide” at beginning, the PG-MT1 will enter “Pattern SD_slide
show “function window, let the user to adjust related setting.
1. Select directory, name start with “slide” first.
2. Setting the timing and period, then start “slide show”
Path: Main -> Tim (Timing) -> SD (Pattern No.00) -> Select
directory (directory name start with “slide”)
Operation in “SD select File” window
“ ▲ ”, “►”:
Change the different setting of slide show:
-
the output timing setting
- Period time(minute) adjust
- Period time(second) adjust
“▲”, “▼”:
Change value.
“Menu/Back” button:Back to the “SD select dir” function
window, and stop the “slide show” procedure
“
“ : Start “slide show” procedure. PG-MT1 will display
all *.bmp in this directory with used defined period.
-5-
／ｓｌｉｄｅ＿８００ｘ６００／
▲▼ ＳＥＬＥＣＴ ＤＩＲ
▲▼ ［１９２０ｘ１０８０ｉ ＠５０］
◄► Ｔｉｍｅ ００ ： ０１
▲▼ ｔｅｓｔ＿１. ｂｍｐ
◄►
［１９２０ｘ１０８０ｉ ＠５０］
／ｐｉｃ１／ｐｉｃ１＿１
▲▼ ► ＳＥＬＥＣＴ ＤＩＲ
／Ｐｉｃ１／
▲▼ ► ＳＥＬＥＣＴ ＤＩＲ
ＳＤ ： ＳＤ＿ｃａｒｄ
▲ ▼
Ｐ０７： ＣＯＬＯＲＢＡＲ＿１
▲ ▼
［１９２０ｘ１０８０Ｐ ］＠６０
▲ ▼ ◄ ►