AvMap GeoPilot II - Manual (Page 67)

6
WIdTh - the width of the screen is displayed.
Use the cursor key to select and ‘ENT’ to accept. The default setting is Bar.
14.1.3 language
Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus
and options). Map detail will remain in English.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “GENERAL SETUP” ‘ENT’ +
“LANGUAGE” + ‘ENT’
Use the cursor key to select and ‘ENT’ to accept. The default setting is English.
14.1.4 military frequency
The display of Military Frequency data can be set to ON or OFF (this data is found in European
Database cards).
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “GENERAL SETUP” + ‘ENT’ + “MILITARY
FREQUENCY” + ‘ENTER’
Use the cursor key to select and ‘ENT’ to accept. The default setting is Off.
14.1.5 Airspaces level
Sets the Altitude value that conditions the air spaces display if MOVING MAP
MENU -> AIRSPACE SETTINGS -> DISPLAY AIRSPACES is set ABOVE or BELOW.
If DISPLAY AIRSPACES is set ALL , AIRSPACE LEVEL is irrelevant.
14.1.6 Terrain legend
Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP
MENU any of the TAWS features is selected. one of the R-A-M mounting options.
14.2 fIx SeT-UP
The Fix Setup sub-menu contains options relating to GPS data input and display.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’
14.2.1 fix Source
The Geopilot II uses positioning information provided by the internal GPS-receiver or by an external
NMEA 0183, external Air Data, or External RNAVdata string.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “FIX SOURCE”
+ ‘ENT’
Use the cursor key to select and ‘ENTER’ to accept. When connecting the Geopilot II to an external
source, be sure the data output of the external device is set for the correct format (see Sec. 2.5).
The default setting is Internal GPS.
14.2.2 differential Correction Source
The Geopilot II can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To select
the Differential Correction source:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “DIFFERENTIAL