AvMap GeoPilot II - Manual (Page 69)

69
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’ + “ARRIVAL
ALARM RADIUS” + ‘ENT’
After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key select the number desired
and press ‘ENT’. The default setting is Off (00.00).
14.3.2 xTe Alarm range
Specifies the distance your Cross Track Error (XTE) can vary before the sound of an alarm.
To set this alarm:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’ + “XTE
ALARM RANGE” + ‘ENT’
After pressing ‘ENT’ a box will appear with 00. Using the cursor key select the number desired and
press ‘ENT’. The default setting is Off (00).
14.3.3 Waypoint Alarm radius
Specifies the radius of a circle around the User Waypoint: when your aircraft reaches a point within
this circle an alarm sounds and the Waypoint Alarm box apprears on the screen.
Note
The alarm is only active for User Waypoints with this symbol selected for the icon: “ ”.
To set the alarm:
> ‘MENU’ 1 sec + ‘MENU’ + “ALARM SETUP” + ‘ENT’ + “AIRSPACE AHEAD ALARM”
+ ‘ENT’
After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key, select the number desired
and press ‘ENT’. The default setting is OFF (00.00). After pressing ‘ENT’ a window is displayed.
In this files the 00.00. default value is set. Choose a parameter moving the arrows keys and press
‘ENT’ to confirm.
14.3.4 TAWS Alarm
Enables the TAWS alarm.
Note
Vertical “ALRM” string appears at the right down edge of the TAWS Legend BOX when the TAWS Alarm is
enabled.
14.3.5 Airspace Ahead Alarm
If your projected track will cross an airspace sector, an alarm will sound and a warning box will
appear on the screen. If there is an altitude limitation to the airspace, we will display an alarm if
your current altitude is within 500 feet of the limitations. To set the time interval for the alarm:
> ‘MENU’ 1 sec + “ALARM SERUP: + ‘ENT’ “AIRSPACE AHEAD ALARM” + ‘ENT’
After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key, select the number desired
and press ‘ENT’.
The default setting is OFF (00.00). In addition, you can select the category of airspace associated