Awntech NewOrleans Series User Manual
Page 3
YOU MAY ALSO NEED AN ASSISTANT FOR LARGER AWNINGS. IT DEPENDS ON
THE SIZE AND WEIGHT OF THE AWNING.
NOTE: YOU WILL FIND THAT THE FITTINGS HAVE BEEN PRE-INSTALLED, AS WE
HAVE PRE-ASSEMBLED AND INSPECTED IT FOR YOU IN THE FACTORY.
The New Orleans Frame must be installed on the wall as there is
no connecting part between BP and AA
STEP 1: Separate all of the parts by part number so they will be easy to assemble.
STEP 2: The Top Bar (TB) must be installed first. The C-Channel on the TB
must be close to the wall. Before installing the TB you must make sure that there
is enough space below the SA for installation clearance . Example NO21 style will
need 24” of the space between the bottom of the Spear Arm (SA) and the Top Bar
(TB) for the height of the awning (please see the chart below for the height
measurements).