AXEON AT-Series - Manual (Page 5)

AT – Series User’s Manual
MKTF-205
DO NOT UNDER ANY CIRCUMSTANCE
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
REQUIREMENTS. FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
OPERATING LIMITS
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
SYSTEM’S PRODUCTION.
REJECTION, RECOVERY AND
AT-Series reverse osmosis systems
capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT
the listed operating test conditions.
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5
5
DO NOT UNDER ANY CIRCUMSTANCE REMOVE ANY CAU
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
REJECTION, RECOVERY AND FLOW RATES
everse osmosis systems are designed to produce permeate
capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT-500 produces 500 gallons per day of permeate
test conditions.
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5% of total dissolved
06/12
UTION, WARNING,
OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality.
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
FLOW RATES
are designed to produce permeate water at the
capacities indicated by the suffix in the system’s name under the conditions listed
permeate water at
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as a
% of total dissolved