AXEON DT-Series - Manual (Page 16)

16
DT – Series User’s Manual
MKTF-208
06/12
NUMBER IDENTIFICATION
1. Solenoid Valve – Turns On/Off Feed Water
2. 10 Micron Sediment – Removes particulates
3. 5 Micron Sediment – Removes particulates
4. Pressure Gauge - Measures feed pressure
5. Pressure Gauge - Measures pressure after filters
6. Pressure Gauge - Measures pump pressure
7. Pressure Gauge – Measures concentrate pressure
8. Computer Control - Controls RO system
9. Recycle Valve – Recycles concentrate back to feed (if applicable)
10. Concentrate Valve – Controls flow of concentrate (waste) water to the drain
11. RO Pump and Motor - Pressurizes RO System
12. Throttle Valve – Controls flow of the pump
13. Flow Meter - Measures flow of permeate water
14. Flow Meter - Measures flow of concentrate (waste) water
15. Flow Meter - Measures flow of concentrate recycle water (if applicable)
16. Pressure Switch – Turns the pump off at 15 PSI feed pressure
17. Permeate Check Valve- Protects membranes from back pressure
18. Pressure Vessels – Houses Membrane Elements