Chauvet Q-WASH 260-LED User Manual
Page 17
Operation
Q-Wash 260-LED User Manual Rev. 05
-13-
Fan Control
This option defines how you can control the fan speed, whether with the DMX controller or
only from the control panel.
1. Go
to
MENU > SPECIAL > FAN.
2. Select
DMX or SYSTEM.
DMX: Enables the DMX controller to control the fan speed (Control function).
SYSTEM: Restricts the control of the fan speed to the control panel..
Color Calibration
If necessary, you may adjust the color temperature of each of the macros (White1~11).
1. Go
to
MENU > EXTRA.
2. Press
<ENTER> (PASSWORD) will show on the display.
3. Press
<ENTER> (**** will show on the display).
4. Enter the password, as explained in Keylock (CALIB will show on the
display).
5. Press
<ENTER> (3200K will show on the display).
6. Use
<UP> or <DOWN> to select another color temperature (3400~10000 K),
or press <ENTER> to edit the current temperature.
7. Select
RED, GREEN, or BLUE.
8. Select a value (000~255).
9. Repeat for the other colors.
White Calibration
You may calibrate the white color shown when the RGB faders are at “255” and the
MENU > SPECIAL > COLOR setting is RGBTOW.
1. Go
to
MENU > EXTRA.
2. Press
<ENTER> (PASSWORD) will show on the display.
3. Press
<ENTER> (**** will show on the display).
4. Enter the password, as explained in Keylock (CALIB will show on the
display).
5. Press
<ENTER> (3200K will show on the display).
6. Use
<UP> or <DOWN> to select RGBW.
7. Select
RED, GREEN, or BLUE.
8. Select a value (000~255).
9. Repeat for the other colors.