Remote start ready – Buick 2011 Lucerne User Manual

Page 112

Advertising
background image

Black plate (8,1)

Buick Lucerne Owner Manual - 2011

To manually shut off a remote start:

.

Aim the RKE transmitter at the vehicle and press
the remote start button until the parking lamps
turn off.

.

Turn on the hazard warning flashers.

.

Turn the ignition switch on and then off.

The vehicle can be started remotely two separate times
between driving sequences. The engine will run for
10 minutes after each remote start.

Or, you can extend the engine run time by another
10 minutes within the first 10 minute remote start time
frame, and before the engine stops.

For example, if the lock button and then the remote start
buttons are pressed again after the vehicle has been
running for five minutes, 10 minutes are added, allowing
the engine to run for 15 minutes.

The additional 10 minutes are considered a second
remote vehicle start.

Once two remote starts, or a single remote start with
one time extension have been done, the vehicle must
be started with the key.

After the key is removed from the ignition, another
remote start can be performed.

The vehicle cannot be started remotely if the key is in
the ignition, the hood is not closed, or if there is an
emission control system malfunction.

Remote Start Ready

If your vehicle does not have the remote vehicle start
feature, it may have the remote start ready feature. This
feature allows your dealer to add the manufacturer's
remote vehicle start feature.

See your dealer if you would like to add the
manufacturer's remote vehicle start feature to
your vehicle.

3-8

Advertising