Bullet Tools 920 - Manual (Page 3)

3
1. Power Assembly
2. Handle Assembly
3. Fence
4. Table
5. Tail
6. Rails (2)
7. Hone Stone
8. Hardware Kit
Item A. (4) 8mm x 60mm PH Phillips Machine Screws
Item B. (4) M8 Star Washers
Item C. (4) 8mm x 25mm PH Phillips Machine Screws
Item D. (6) 6mm x 16mm PH PHillips Machine Screws
Item E. (5) #10 x 1 PH Phillips Self Tapping Screws
Item F. (1) M16 x 50 BHCS
(Pre-Installed in Cam)
Item G. (1) 10mm Hex Wrench
(Not Shown)
in the BoX
asseMBly
1. attach rails
Attach rails to base using Item A machine screws
fitted with star washers, Item B.
You will need #2 & #3 Phillips head screwdrivers
Please Review and Verify Parts Included:
Hardware Kit * :
A E F D C B
2
3
4
5
6
D
A
B
F
E
C
1
7
2. attach tail
Attach tail and angle brackets to rails using
Item C machine screws. Make sure holes in tail are
facing up.
1 2
*The Hardware Kit is used in
multiple models. Your Shear may
not use all of the items listed.