CEI 830 ULTRAK - Manual (Page 2)

4
SPLIT TIME MEASUREMENT
Through this function, you can know the whole split time from the
beginning. For example, if you want to measure 3-split time, do the
following:
1.
Press the “MODE” key to enter the split mode.
2. Press the “START/STOP” key to start to measure the split time.
3. Press the “LAP/RESET” key for 3 times to record the time of
split 1, split 2 and split 3.
4. Press the “START/STOP” key to save the measurement data.
5. Press the “MODE” key to exit the split time measurement mode.
Note:
1.
Press the “LAP/RESET” key to reset the time to “ ” before
using this function.
2. The following picture shows the way of split time measurement.
RECALLING THE LAP/SPLIT RECORDS
1. Measure the lap/split time as described in the previous sections.
2. After the lap/split time measurement, press the “RECALL” key
to enter the Recall mode.
3. Press “RECALL” key again to check the fastest, the slowest
and average lap records.
4. Press the “LAP/RESET” or “START/STOP” key to check the
time records upwards or downwards.
5. Press the “MODE” or “RECALL” key to return to the lap/split
mode.
Note:
1.
The sports timer can display up to 99-lap/split time records, but
only memory the first 30 records.
2. The lap and split time records will be displayed together when
you recall the lap or split records.
COUNTDOWN TIME SETTING
1. Press the “MODE” key to enter the countdown mode.
2. In countdown mode, press and hold the “RECALL” key for 2
seconds to enter the countdown time setting mode until the
HOUR digit flashes.
3. Press the “START/STOP” key to change the value of the flashing
HOUR digit.
4. Press the “LAP/RESET” key to set the time in this order: Hour >
Minute > Second.
5. Press the “MODE” key to save and exit the setting mode, or let
it exit automatically 30 seconds later without pressing any key.
Note:
1.
The maximum time you set can be “ ”.
2. After the setting, press the “START/STOP” key to start or stop
0 1 2 3 (Split)
the countdown. It can be operated for 99 times and the
countdown cycle times will be displayed on the LCD.
3. The default countdown time is “ ” (10 hours). Without setting
the countdown time, the countdown timer can also be operated by
pressing the “START/STOP” key.
TIME AND CALENDAR SETTING
1. In normal time mode, press and hold the “RECALL” key for 2
seconds to enter the normal time setting mode until the Second
digit flashes.
2. Press the “START/STOP” key to change the value of the flashing
Second digit. (Note: For the Second setting, pressing the
“START/STOP” key can only return its value to “00”, while for
the latter setting items, pressing the “START/STOP” key can
increase the setting values.)
3. Press the “LAP/RESET” key to set time and calendar in this
order: Second > Minute > Hour > Year > Month > Date > 12/24
Hr.
4. Press the “MODE” key to save and exit the setting mode, or let
it exit automatically 30 seconds later without pressing any key
ALARM TIME SETTING
1. Press the “MODE” key to enter the alarm time mode.
2. Press and hold the “RECALL” key for 2 seconds to enter the
alarm time setting mode until the HOUR digit flashes.
3. Press the “START/STOP” key to increase the value of the
flashing HOUR digit.
4. Press the “LAP/RESET” key to set the alarm time in this order:
Hour > Minute.
5. Press the “MODE” key to save and exit the setting mode, or let
it exit automatically 30 seconds later without pressing any key.
Note:
1.
The alarm will be automatically turned on when you set the alarm
time.
2. Press any key to stop the alarm when the bell is ringing. The
alarm duration is 30 seconds.
KEY TONE SETTING
In normal time mode, press “START/STOP” key or “LAP/REST” to turn
on the key tone with the icon “
” appears on the LCD.
BATTERY REPLACEMENT
If there is no display on the LCD or if the display becomes dim
(especially in dark environment), remove the screws in the back of
the unit and replace with CR2032 battery according to the polarity
information at once.
Note:
1.
In order to reduce the battery power consumption, you’d better
expose the solar panel in environment with sufficient light.
2. Attention! Please dispose of the used unit or batteries in an
ecologically safe manner.
Start Split 1 Split 2
Split 3 Stop
Lap 3 time
Split 3 time
Lap 2 time
Split 2 time
Lap 1 time
Split 1 time
Countdown mode Hour setting Minute setting
Second setting
Second setting Minute setting Hour setting
12/24Hr setting Month setting Date setting Year setting
Normal time mode