Chandler Limited Zener Limiter - Manual (Page 6)

Controls and Features continued
LINK - As with the previous versions of the TG Limiter, the LINK system is relatively
primitive. To link channels you must not only set the LINK control to stereo but also set the
controls on each channel to matching settings. Since all controls on the Zener are stepped
with high quality resistors, matching channels for stereo use is very easy.
STEREO MONO
LINK
Please feel free to call our shop anytime for help or questions.
Prior to sending in your gear for repair, please contact our shop at the number below. We will assist
you in troubleshooting the problem and if needed, we will issue you an RMA# to send in the gear.