Windshield wiper/washer, Windshield wiper/washer -4 – CHEVROLET 2012 Impala User Manual

Page 102

Advertising
background image

Black plate (4,1)

Chevrolet Impala Owner Manual - 2012

5-4

Instruments and Controls

Windshield Wiper/Washer

Turn the band with the wiper symbol
to control the windshield wipers.

8

(Mist): Single wipe, turn to

8

,

then release. Several wipes, hold
the band on

8

longer.

9

(Off): Turns the windshield

wipers off.

6

(Adjustable Interval Wipes):

Turn the band up for more frequent
wipes or down for less frequent
wipes.

6

(Low Speed): Slow wipes.

?

(High Speed): Fast wipes.

Clear ice and snow from the wiper
blades before using them. If frozen
to the windshield, carefully loosen or
thaw them. Damaged wiper blades
should be replaced. See Wiper
Blade Replacement on page 10‑23
.

Heavy snow or ice can overload the
wiper motor. A circuit breaker will
stop the motor until it cools down.

Windshield Washer

Push the paddle

L

at the top of the

lever to spray washer fluid on the
windshield. The wipers run for
several sweeps and then either stop
or return to the preset speed. The
ignition key must be in ACC/
ACCESSORY or ON/RUN for this to
work. See Washer Fluid on
page 10‑18
.

{

WARNING

In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.

When the vehicle is low on washer
fluid, the WASHER FLUID LOW
ADD FLUID displays in the Driver
Information Center (DIC) for
60 seconds. When the ignition is
turned off, this message displays
again for three seconds to remind
you that the fluid level is low.

Until the fluid reservoir is refilled,
every time the vehicle is started, the
WASHER FLUID LOW ADD FLUID
message displays in the Driver
Information Center (DIC) for
60 seconds. See Washer Fluid
Messages on page 5‑35
.

Advertising