CHEVROLET 2012 Impala - Manual (Page 105)

Black plate (7,1) Chevrolet Impala Owner Manual - 2012
Instruments and Controls 5-7
2. To increase or decrease the
time, do one of the following
while the hours or minutes are
flashing:
. Turn the
f
knob.
. Press
¨
SEEK or
©
SEEK.
. Press \ FWD or s REV.
3. Press the
H
button again until
the clock display stops flashing
to set the currently displayed
time, or wait five seconds until
the flashing stops and the
current time displayed is
automatically set.
To change the time default setting
from 12 hour to 24 hour, press the
H
button until 12H or 24H is
displayed. Once 12H or 24H is
displayed, turn the
f
knob to the
desired option to select the setting.
Press the
H
button again to apply
the setting, or let the screen
time out.
With Date Display
Single CD (MP3) Player
This radio has a
H
button for setting
the time.
To set the time and date:
1. Turn the radio on.
2. Press the
H
button and the HR,
MIN, MM, DD, and YYYY (hour,
minute, month, day, and year)
display.
3. Press the pushbutton located
under any one of the tabs to be
changed.
4. To increase the time or date, do
one of the following:
. Press the pushbutton below
the selected tab.
. Turn the
f
knob clockwise.
. Press
¨
SEEK.
. Press
\
FWD.
5. To decrease the time or date, do
one of the following:
. Turn the f knob
counter‐clockwise.
. Press
©
SEEK.
. Press s REV.
The date does not automatically
display. To see the date press
the
H
button while the radio is on.
The date with display times out after
a few seconds and goes back to the
normal radio and time display.
To change the time default setting
from 12 hour to 24 hour or to
change the date default setting from
month/day/year to day/month/year:
1. Press the
H
button and then the
pushbutton located under the
forward arrow tab. The time 12H
and 24H, and the date MM/DD/
YYYY (month, day, and year)
and DD/MM/YYYY (day, month,
and year) displays.