Antilock brake system (abs) warning light, Stabilitrak® off light, Antilock brake system (abs) – CHEVROLET 2011 Tahoe User Manual

Page 22: Warning light -10, Stabilitrak, Off light -10, Off light

Advertising
background image

Black plate (10,1)

Chevrolet Tahoe and GMC Yukon/Yukon Denali Hybrid - 2011

5-10

Instruments and Controls

Antilock Brake System
(ABS) Warning Light

For vehicles with the Antilock Brake
System (ABS), this light comes on
briefly when the engine is in
ON/RUN.

That is normal. If the light does not
come on then, have it fixed so it will
be ready to warn if there is a
problem.

If the ABS light stays on, turn the
ignition off, if the light comes on
while driving, stop as soon as it is
safely possible and turn the ignition
off. Then start the engine again to
reset the system. If the ABS light
still stays on, or comes on again
while driving, the vehicle needs
service. If the regular brake system
warning light is not on, the vehicle

still has brakes, but not antilock
brakes. If the regular brake system
warning light is also on, the vehicle
does not have antilock brakes and
there is a problem with the regular
brakes. See Fuel Economy Gauge
on page 5‑6
.

See Driver Information Center (DIC)
on page 5‑11
for all brake related
DIC messages.

StabiliTrak

®

OFF Light

For vehicles with StabiliTrak, this
warning light comes on briefly when
the ignition is in ON/RUN.

If it does not, have the vehicle
serviced by your dealer. If the
system is working normally the
indicator light goes off.

If the light comes on and stays on
while driving, there could be a
problem with the StabiliTrak system
and the vehicle might need service.
When this warning light is on, the
StabiliTrak system is off and does
not limit wheel spin.

The light flashes if the system is
active and is working to assist the
driver with directional control of the
vehicle in difficult driving conditions.

See the owner manual for more
information.

Advertising