Drive motor/generator control, Module (dmcm) coolant surge tank pressure cap -9, Module (dmcm) cooling system -9 – CHEVROLET 2011 Tahoe User Manual

Page 57: Vehicle care 10-9

Advertising
background image

Black plate (9,1)

Chevrolet Tahoe and GMC Yukon/Yukon Denali Hybrid - 2011

Vehicle Care

10-9

Drive Motor/Generator
Control Module (DMCM)
Coolant Surge Tank
Pressure Cap

See Engine Compartment Overview
on page 10‑4
for more information
on location.

The Drive Motor/Generator Control
Module (DMCM) coolant surge tank
pressure cap must be fully installed
on the hybrid coolant surge tank.

Notice: If the pressure cap is not
tightly installed, coolant loss and
possible damage to the Drive
Motor/Generator Control
Module (DMCM) may occur. Be
sure the cap is properly and
tightly secured.

Drive Motor/Generator
Control Module (DMCM)
Cooling System

In addition to the regular cooling
system, the vehicle also has a
cooling system for the DMCM
system. This system is serviced
differently than the vehicle's main
cooling system. The DMCM cooling
system includes the DMCM coolant
surge tank, DMCM surge tank
pressure cap, DMCM cooling
pumps, hybrid cooling radiator and
the Drive Motor/Generator Control
Module (DMCM). The DMCM
cooling system uses a 50/50
pre-mixed DEX-COOL

®

coolant and

deionized water available at your
dealer. See “Engine Coolant” and
“Cooling System” in the owner
manual for more information.

When it is safe to lift the hood:

A. Drive Motor/Generator Control

Module (DMCM)

B. Engine Coolant Surge Tank

Pressure Cap

C. DMCM Coolant Surge Tank/

Engine Coolant Surge Tank

D. DMCM Cooling Hoses

(Out of View)

E. DMCM Coolant Tank

Pressure Cap

Advertising