Head restraint adjustment, Safety belts, Sensing system for passenger airbag – CHEVROLET 2011 Malibu User Manual

Page 15: Head restraint adjustment -9 safety belts -9, Sensing system for passenger, Airbag -9

Advertising
background image

Black plate (9,1)

Chevrolet Malibu Owner Manual - 2011

In Brief

1-9

Press the top of the switch again to
go to the low heat setting. The
indicator light “1” will be lit.

Press the bottom of the switch to
turn the feature off.

The heated seats are canceled
when the ignition is turned off.

For more information, see Heated
Front Seats on page 3‑7
.

Head Restraint
Adjustment

Do not drive until the head restraints
for all occupants are installed and
adjusted properly.

To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.

For more information see Head
Restraints on page 3‑2
and Seat
Adjustment on page 3‑3
.

Safety Belts

Refer to the following sections for
important information on how to use
safety belts properly.

.

Safety Belts on page 3‑9.

.

How to Wear Safety Belts
Properly on page 3‑13
.

.

Lap-Shoulder Belt on page 3‑18.

.

Lower Anchors and Tethers for
Children (LATCH System) on
page 3‑48
.

Sensing System for
Passenger Airbag

The passenger sensing system will
turn off the right front passenger
frontal airbag under certain
conditions. The driver airbags are
not affected by this.

The passenger airbag status
indicator will be visible on the
instrument panel when the vehicle is
started.

Advertising