Back-up lamps, Lamps -33, Vehicle care 10-33 – CHEVROLET 2011 Malibu User Manual
Page 279
Advertising
Black plate (33,1)
Chevrolet Malibu Owner Manual - 2011
Vehicle Care
10-33
5. Disconnect the wiring harness
connector (C) from the LED (B).
6. Turn the LED (B)
counterclockwise to remove it.
7. Install a new LED (B).
8. Reverse Steps 2 through 6 to
reinstall the taillamp
assembly (A).
Back-Up Lamps
1. Open the trunk. See Trunk on
page 2‑9 for more information.
2. Remove the push pins holding
the trunk trim (B).
3. Move the trim aside far enough
to gain access to the bulb
assembly (A).
Advertising