CHEVROLET 2011 Colorado - Manual (Page 188)

Black plate (10,1) Chevrolet Colorado Owner Manual - 2011
9-10 Driving and Operating
Off-roading requires a different kind
of alertness from driving on paved
roads and highways. There are no
road signs, posted speed limits,
or signal lights. Use good judgment
about what is safe and what is not.
Driving on Hills
Off-road driving often takes you
up, down, or across a hill. Driving
safely on hills requires good
judgment and an understanding
of what the vehicle can and cannot
do. There are some hills that simply
cannot be driven, no matter how
well built the vehicle.
{
WARNING
Many hills are simply too steep
for any vehicle. If you drive up
them, you will stall. If you drive
down them, you cannot control
your speed. If you drive across
them, you will roll over. You could
(Continued)
WARNING (Continued)
be seriously injured or killed.
If you have any doubt about the
steepness, do not drive the hill.
Approaching a Hill
When you approach a hill, decide
if it is too steep to climb, descend,
or cross. Steepness can be hard
to judge. On a very small hill, for
example, there may be a smooth,
constant incline with only a small
change in elevation where you can
easily see all the way to the top.
On a large hill, the incline may get
steeper as you near the top, but you
might not see this because the crest
of the hill is hidden by bushes,
grass, or shrubs.
Consider this as you approach a hill:
. Is there a constant incline,
or does the hill get sharply
steeper in places?
. Is there good traction on the
hillside, or will the surface cause
tire slipping?
. Is there a straight path up or
down the hill so you will not
have to make turning
maneuvers?
. Are there obstructions on the hill
that can block your path, such
as boulders, trees, logs, or ruts?
. What is beyond the hill? Is there
a cliff, an embankment, a
drop-off, a fence? Get out and
walk the hill if you do not know.
It is the smart way to find out.
. Is the hill simply too rough?
Steep hills often have ruts,
gullies, troughs, and exposed
rocks because they are more
susceptible to the effects of
erosion.