CHEVROLET 2011 Colorado - Manual (Page 284)

Black plate (38,1) Chevrolet Colorado Owner Manual - 2011
10-38 Vehicle Care
Center High-Mounted
Stoplamp (CHMSL)
To replace the CHMSL bulb:
1. Remove the two screws and lift
off the lamp assembly from the
vehicle.
2. Turn the bulb socket
counterclockwise and remove it
from the lamp assembly.
3. Holding the socket, pull the bulb
to release it from the socket.
4. Push the new bulb into the
socket until it clicks.
5. Insert the bulb socket into the
lamp assembly and turn it
clockwise to secure.
6. Reinstall the lamp assembly and
tighten the screws.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket.
2. Turn the bulb socket
counterclockwise and pull the
bulb socket out of the connector.
3. Pull the old bulb straight out
from the bulb socket.
4. Push the new bulb straight in
until it clicks to secure it.
5. Reach under the rear bumper to
reinstall the bulb socket into the
connector.
6. Turn the bulb socket clockwise
to secure it to the connector.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Cargo Lamp
and Center
High‐Mounted
Stoplamp (CHMSL)
912LL
License Plate Bulb 168LL
Headlamps
High-beam 9005
Low-beam/
Daytime
Running
Lamp (DRL)
9006