Securing a child restraint in a rear seat position, A child restraint in a rear seat – CHEVROLET 2010 Suburban User Manual

Page 113

Advertising
background image

Black plate (75,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

If the position you are
using has an adjustable
headrest or head restraint
and you are using a
single tether, raise the
headrest or head restraint
and route the tether under
the headrest or head
restraint and in between
the headrest or head
restraint posts.

3. Push and pull the child restraint in different

directions to be sure it is secure.

Securing a Child Restraint in a Rear
Seat Position

When securing a child restraint in a rear seating
position, study the instructions that came with the child
restraint to make sure it is compatible with this vehicle.

If the child restraint has the LATCH system, see Lower
Anchors and Tethers for Children (LATCH) on
page 2‑68
for how and where to install the child
restraint using LATCH. If a child restraint is secured in
the vehicle using a safety belt and it uses a top tether,
see Lower Anchors and Tethers for Children (LATCH)
on page 2‑68
for top tether anchor locations.

Do not secure a child seat in a position without a top
tether anchor if a national or local law requires that the
top tether be anchored, or if the instructions that come
with the child restraint say that the top strap must be
anchored.

2-75

Advertising
This manual is related to the following products: