Removing the flat tire and installing the, Spare tire -94 – CHEVROLET 2010 Suburban User Manual

Page 528

Advertising
background image

Black plate (94,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

Once the retainer is separated from the guide pin,
tilt the retainer and pull it through the center of the
wheel along with the cable and latch.

8. Put the spare tire near the flat tire.

Removing the Flat Tire and Installing
the Spare Tire

1. Do a safety check before proceeding. See

Changing a Flat Tire on page 6‑88 for more
information.

2. If your vehicle has a center cap that covers the

wheel fasteners, place the chisel end of the wheel
wrench in the slot on the wheel and gently pry the
cap out.

6-94

Advertising
This manual is related to the following products: