Airbag readiness light, Airbag readiness light -24, Passenger safety belt reminder light – CHEVROLET 2010 Impala User Manual

Page 174

Advertising
background image

Passenger Safety Belt Reminder Light

Several seconds after the engine is started, a chime
sounds for several seconds to remind the front
passenger to buckle their safety belt. This only occurs
if the passenger airbag is enabled. See Passenger
Sensing System
on page 2-66 for more information.
The passenger safety belt light, located on the instrument
panel, comes on and stays on for several seconds and
then flashes for several more.

This chime and light are
repeated if the passenger
remains unbuckled and
the vehicle is in motion.

If the passenger safety belt is buckled, neither the
chime nor the light comes on.

The front passenger safety belt warning light and chime
may turn on if an object is put on the seat such as a
briefcase, handbag, grocery bag, laptop or other
electronic device. To turn off the warning light and or
chime, remove the object from the seat or buckle the
safety belt.

Airbag Readiness Light

The system checks the airbag’s electrical system for
possible malfunctions. If the light stays on it indicates
there is an electrical problem. The system check includes
the airbag sensor, the pretensioners, the airbag modules,
the wiring and the crash sensing and diagnostic module.
For more information on the airbag system, see Airbag
System
on page 2-56.

The airbag readiness light
flashes for a few seconds
when the engine is started.
If the light does not come
on then, have it fixed
immediately.

4-24

Advertising