Canon DR-3080C - Manual (Page 25)

Installing the Scanner 21
● If you are using Windows 98 , the “Add New Hardware Wizard” dialog
box appears.
1. Click the Next button.
2. Select “Search for the best driver for your device. (Recommended).” and
then click the Next button.
3. Load the setup disc into the computer’s CD-ROM drive.
4. Select “Specify a location”, type “D:\INF” (where “D” is the drive letter
assigned to your CD-ROM drive) and then click the Next button.
5. Click the Next button.
6. Click the Finish button.
● If you are using Windows Me , the “Add New Hardware Wizard” dialog
box appears.
1. Select “Specify the location of the driver (Advanced)” and then click the
Next button.
2. Load the setup disc into the computer’s CD-ROM drive.
3. Select “Search for the best driver for your device. (Recommended).” and
then select “Specify a location”. Next, type “D:\INF” (where “D” is the
drive letter assigned to your CD-ROM drive) and then click the Next
button.
4. Click the Next button.
5. Click the Finish button.
● If you are using Windows 2000 Professional , the “Found New Hardware
Wizard” dialog box appears.
1. Click the Next button to proceed to the “Install Hardware Device Drivers”
screen.
2. Select “Search for a suitable driver for my device (recommended)” and
then click the Next button to proceed to the “Locate Driver Files” screen.
3. Select “Specify a location” and then click the Next button.
4. Load the setup disc into the computer’s CD-ROM drive.
5. Type “D:\INF” (where “D” is the drive letter assigned to your CD-ROM
drive) and then click the OK button.
6. In the “Driver Files Search Results” screen, click the Next button.
7. If the message “Digital Signature Not Found” appears, simply click Yes to
continue installation.
8. On the “Completing the Found New Hardware Wizard” screen, click the
Finish button.