Canon DR-3080C User Manual
Page 58
54
Specifications
Amount of paper that can be
stacked in automatic feeder
10 mm stack, maximum
Interface
SCSI-II
Other functions
Automatic document thickness adjustment
Dimensions (with trays closed)
7.5 x 13.5 x 10.9 in. (H x W x D)
191 x 344 x 278 mm (H x W x D)
Dimensions (with trays open)
9.6 x 13.5 x 21.9 in. (H x W x D)
244 x 344 x 555 mm (H x W x D)
Weight
Approximately 8.1 kg
power supply
100V to 120V AC (50/60Hz)
200V to 240V AC (50/60Hz)
Power consumption
Scanning:
42W maximum
Standby:
Under 20W
Low-power mode:
Approx. 10W
Noise
Not more than 70dB
Operating environment
Temperature:
10 degree C to 32.5 degree C
Humidity:
20% to 80% RH
● The functions described above can be used if they are supported by the application
software.
● Some functions may not be available, depending on the performance of your PC and
depending on your software.
Due to our ongoing efforts to improve our products, the specifications described above are
subject to change without notice.
Options
Endorser ED500
This device prints a six-digit number and a letter on
the back side of a document that has been scanned.
Consumables
Exchange Roller Kit
This is a transport roller replacement kit. Service
personnel must actually perform the replacement.
Contact your service personnel.