Citizen Systems iDP-3550 - Manual (Page 106)

ESC "&" s n m [a[p] s
×
a]m - n + 1
[Function] Defining the download character set
[Code] <1B>H <26>H s n m [a[p] ... <ps
×
a>] m - n + 1
[Range] s = 2
32
≤
n
≤
m
≤
255
0
≤
a
≤
9
0
≤
p1 ... ps
×
a
≤
255
[Outline] This command defines the download alphenumeric or Katakana. s denotes the number of
bytes in the vertical direction, n the start character code, and m the end character code,
respectively. When defining only one character, set n = m.
The 224 ASCII code characters, 32 to 255, are definable. a specifies the number of dots in
the horizontal direction to be defined. p is the data you want to define and shows the a-dots
worth of pattern in the horizontal direction from the left edge. The remaining pattern on the
right side will be a space. Once the download characters are defined, they remain valid until
they are redefined or the download deletion command (ESC DC2 n1 n2) is executed.
[Default] Same as the internal character set.
[Caution] The horizontally adjacent dots cannot be printed. The 2nd-byte data in the vertical direction
is valid only for the most significant bit.