Intellistart and smartwindows sensor bypass, Auxiliary channel bypass, Panic mode with smart door locking – CLIFFORD AvantGuard 5.1 User Manual
Page 16
13
© 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
intellistart and smartwindows sensor bypass
When the system sees a command to start the vehicle via the
Intellistart, it bypasses all sensors and will continue to bypass these sen-
sors until the remote start shuts down.
When the system sees a SmartWindows command for up or down
operation, the unit will automatically bypass all sensors until the win-
dows complete their operation.
auxiliary channel bypass
All sensor will be bypassed while a pulsed or timed auxiliary output
channel is active.
panic mode with smart door locking
If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your transmitter! Just press
for
two seconds to enter Panic Mode. The siren will sound and the park-
ing lights will flash for the programmed duration. If the ignition is on,
the doors will lock; if the ignition is off, the doors will unlock. To stop
Panic Mode at any time press
on the transmitter again.