Cleaning your freezer, Locating the proper electrical supply, Recommended grounding method – Whirlpool CHEST FREEZERS User Manual
Page 5: Installing your freezer, Awarning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Proper installation of any appliance is very important. This section will tell you everything you
need to know to install your freezer properly.
Installing Your Freezer
Cleaning your freezer
Clean your freezer thoroughly before using it.
1. Use a sponge, cloth, or paper towel and
mild detergent in warm water to clean
outside and inside of freezer, door liner,
and gasket.
2. Wipe and dry thoroughly.
Locating the proper electrical supply
AWARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electricai shock.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 am
pere fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
Attach power cord lock, from literature
package inside the freezer, over power cord
plug. See Electrical Requirements and
Grounding Instructions Sheet in literature
package for complete details.
AWARNING
Electrical Shock Hazard
Plug into a grounded three prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can cause death, fire, or electrical
shock.
3-prong grounding
type wall receptacle
Power cord lock
Freezer
power plug
3-prong
grounding
plug