Whirlpool CHEST FREEZERS - Manual (Page 7)

In order to obtain the best possible results from your freezer, you must operate it properly.
This section will tell you how to do just that.
Using Your Freezer
Setting the temperature control
Turn the control to 4. This setting is de- 4
signed to maintain the temperature at or
near 0°F (-17.8°C) under normal operating
conditions.
Allow the freezer to cool 6 to 8 hours
before filling with frozen food. Let the freezer
cool overnight before adding large amounts
of unfrozen food. Never add more than 2 to
3 pounds of unfrozen food per cubic foot of
freezer space.
U
NOTE: When the freezer is first started, the
compressor will run constantly until the
cabinet is cooled. It may take up to 6 to 8
hours or longer, depending on room tem­
perature and the number of times the freezer
door is opened.
After the cabinet is cooled, the compressor
will turn on and off as needed to keep the
freezer at the proper temperature.
The outside of your freezer may feel
warm. This is normal. The freezer’s design
and main function is to remove heat from
packages and air space inside the freezer.
This heat is transferred to the room air, so
the outside of the freezer may feel warm.
Adjusting the temperature control
• Turn control to a higher number for
colder temperatures.
• Turn control to a lower number for less
cold temperatures.