Whirlpool ET25PK - Manual (Page 9)

U S I N G Y O U R R E F R I G E R A T O R
Adjusting the shelf glide
The glide can be used to secure odd-shaped
items or to separate other items.
To adjust a glide:
1. Grasp glide.
2. Slide glide along track.
NOTE: Shelf glide cannot be removed.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
Kerns.
To remove glass shelves:
1. Remove Kerns from sheK.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. TiK sheK up at front until hooks drop into slots.
Lower front of shelf to level posKion. Glass shelves are heavy.
Be careful.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
3. Puil cover straight out.
4. Repiace cover in reverse order.
Pull out to the stop, lift
the front and pull again.