Whirlpool 3149595 - Manual (Page 4)

ACAUnON
Floor Damage
Keep shipping base under oven
when moving across floor.
Failure to do so may cause
damage to floor covering,
4 Move over^ close to cabinet
■ opening. Make the
electrical connection. See
"Electrical requirements' and
"Electrical connection' sections.
Panels A and B, for details.
5 Re move and discard the
■ shipping base. Lift oven up
into cabinet opening using the oven
opening as an area to grip. Thread
coble through opening in cabinet.
ACAUTION
Personal Injury/Producl
Damage Hazard
Securely fasten oven lo cabinets
using the eight screws provided.
Failure to do so could cause the
oven to move or tip during use
and result in personal injury or
product damage.
6 Center oven in cabinet
■ cutout. Secure oven to
cabinet using eight screws through
the mounting holes in the front frame
of the oven.
7 Put the air griile in place
■ beiow the iower oven
opening, making sure that the
louvers in the air grille point down,
the flange is at the bottom, and the
mounting holes are at the top, Slide
the air grille into position and attach
it to the oven cabinet with the three,
black or chrome, metal screws
provided.
8
.
Repidce the upper oven
door by fitting both corners
of the door over the ends of the
hinges. Push the door evenly and
completely onto the hinges.
Remove the nails from the hinges.
Reinstall two screws in the Inner door
panel. Close the oven door. If the
door does not close, you have not
pushed the door completely onto
the hinges. Repeat for the lower
oven door.
Turn on
power
supply.
Check the
operation of
the oven
elements. Set
the oven selector
control knob to "BAKE", O’heoven
selector control knob is not available
on all models.) Set the oven
temperature control knob to 350°F.
The bottom element should glow red
and the indicator light should be on.
The upper element should become
hot, but not glow red. The oven ’
indicator light goes off when the
oven Is preheated. Repeat for the
lower oven.
the oven selector
and oven temperoture control knobs
to "BROIL", (The oven selector
control knob is not available on all
models.) The top element should
glow red and the indicator light
should be on. Repeat for the lower
oven broil element.
You have just finished
Installing your new
Whirlpool oven. To get the
most efficient use from your new
oven, read your Whirlpool Use
and Care Guide. Keep Installation
Congratulations!
Instructions and Guide close to oven j
, lor easy reference. The Insfruclions /
will make reinstalling your
Whirlpool oven in another
home os easy os the
first installalion.
Panel C