Color presets, Pan invert – Chauvet LEGEND 250RX User Manual
Page 11
DMX-1655 Manual Version 1.11
11
11
11
11
NOTE!
Chauvet’s CA-8 Easy Controller offers a simple, yet effective means of selecting various other
automatic program functions not directly available through the control panel. Please read the area
labeled “CA-8 Easy Controller”
Slave & 2 Light Show operation
1.
Press the MENU button until the display reads-
.
2.
Press the ENTER button to select Slave Mode. The selection is confirmed when
begins to blink. You must make a selection w ithin 8 seconds.
3.
Press the UP and DOWN buttons to toggle betw een the 2 slave modes.
4.
Press the ENTER button to activate selection.
(Normal) Synchronized movement of the fixture.
(2 Light Show ) Pan & tilt w ill be inverted on this fixture. All other programs w ill execute in
sync.
NOTE!
Slave mode can only be assigned w hen the fixture is presently connected to other fixtures.
Color presets
The Legend 250RX provides 2 color preset modes. This affects the way you call colors on
the slider on a DMX controller.
1.
Press the MENU button until the display reads-
.
2.
Press the ENTER button to select Color Mode. The selection is confirmed when
begins to blink. You must make a selection w ithin 8 seconds.
3.
Press the UP and DOWN buttons to toggle betw een the 2 Color Modes, Normal
and Split Colors
.
4.
Press the ENTER button to activate selection.
Normal color mode provides indexed color presets. Only solid colors w ill appear as you
move the channel fader on a controller.
Split color mode provides indexed solid and split color presets. Both w ill appear as you
move the channel fader on a controller.
NOTE!
A color scrolling preset exists in both modes. This is when the color wheel begins to rotate
continuously and you can select the rate of speed, for a rainbow color like affect.
Pan invert
1.
Press the MENU button until the display reads-
.
2.
Press the ENTER button to select Pan Invert. The selection is confirmed when
begins to blink. You must make a selection w ithin 8 seconds.
3.
Press the UP and DOWN buttons to toggle betw een Normal
and
Inverted
.
4.
Press the ENTER button to activate selection.
Normal pan movement
Pan movement inverted