Chauvet LEGEND 250RX - Manual (Page 12)

DMX-1655 Manual Version 1.11 12 12 12 12
Tilt invert
1. Press the MENU button until the display reads- .
2. Press the ENTER button to select Tilt Invert. The selection is confirmed w hen
begins to blink. You must make a selection w ithin 8 seconds.
3. Press the UP and DOWN buttons to toggle betw een Normal and
Inverted .
4. Press the ENTER button to activate selection.
Normal tilt movement
Tilt movement inverted
LCD reverse display
1. Press the MENU button until the display reads- .
2. Press the ENTER button to reverse the display. The selection is confirmed when
the display begins to blink. You must make a selection within 8 seconds.
3. Follow step # 2 again to return the display to normal.
Normal display orientation
Orientation reversed
Focus adjustment
Focus adjustment enables the user to set a lens focus on any of 5 specific focus points (x/y
axis positioning). Manual focus adjustment is available in Stand-alone only.
1. Press the MENU button until the display reads- .
2. Press the ENTER button and the fixture will automatically move to the first
position which is straight up or Tilt/90°. The display also begins to blink. There are
5 selectable positions in total: Tilt/90°, Pan/0°, Pan/90°, Pan/180° & Pan/270°.
Pressing ENTER button will advance the head to the next position. Leave in the
desired position and follow the next step.
3. At this point you can manually adjust the focus by pressing the UP and DOWN
buttons. The display w ill read numbers 1 through 255.
4. Press the MENU button to store this setting.
Self test mode
1. Press the MENU button until the display reads- .
2. Press the ENTER button and the fixture will run through various self-test
programs.
3. Press the MENU button to return to the main menu.