Changing settings, Beep, Eep beep – Whirlpool MCB790XT User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

When the oven temperature reaches
450 F, the oven beeps twice and the
PREHEAT Indicator Light goes off,
“450F” will stay on the Display and the

oven will hold that temperata re up to
30 minutes, or until the food has been
placed In the oven and START has

been touched. NOTE: The oven will

automatically shut otf and the

Display will show the time ot

day if food has not been placed
in the oven within 30 minutes.

4.

Place food in oven.
Close door.

The Display will show the programmed
broiling time.

5.

Touch START again.

BEEP

b

EEP

b

EEP BEEP

The Display will couht down the cook­

ing time to show how much time is left
in the broiling cycle.

Check the food just before the broiling
time is up. If food needs more cooking

time, add before broil time is
finished. This prevents the oven from

going into another PREHEAT cycle.

When the Broil Time cycle ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) "End" will remain on the
Display and a beep will sound every
60 seconds (to remind you that food
is left in the oven) until the door is

opened or CANCEL is touched. The
display will then show the time of
day. The fan will continue to run until
internal oven parts have started
to cool.

Changing settings

• Broiling time may be changed before or after starting the cycle. Touch BROIL TIME, new broiling

time, then START.

• Always check food for doneness just before the broiling time is finished. This allows you

to add additional cooking time, if required.

23

Advertising