Using the temperature probe with roast time/combo, Changing settings, Using temp reset – Whirlpool MCB790XT User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Temperature Probe with ROAST TIME/COMBO
1. Insert the temperature probe into the food. (See page 16.)
2. Place food in the oven and plug the probe into the socket on the oven ceiling. Close the door.
(See page 16.)
3. Touch PROBE TEMP
4. Touch Number Pads for the desired final temperature.
5. Touch ROAST TIME/COMBO.
6
.
Touch START
Changing settings
• To change a time setting before or after starting the oven, touch ROAST TIME/COMBO, touch
number pads for new time setting, then touch START.
• To change a temperature setting before or after starting the oven, touch TEMP RESET, touch the
number pads for new temperature setting, then touch START,
• To change the microwave Oook Power before or after starting the oven, touch COOK POWER,
touch the number pad for the new power level, then START,
• The oven will not accept roasting time longer than 199 minutes 99 seconds. It also will not
accept a 5 digit number beginning with 2 through 9, Cancel and reset. (Example: Set 200:00
as199:60.)
Using TEMP RESET
TEMP RESET allows pre-programmed convection temperatures in BAKE TIME and ROAST TIME to be
changed before or after starting the oven.
To change a temperature setting:
• Touch TEMP RESET.
• Touch Number Pads for new temperature setting.
• Touch START
25