Before using your dehumidifier, In this section, Installing it properly – Whirlpool AD050 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BEFORE USING YOUR DEHUMIDIFIER

Before Using Your
Dehumidifier

In This Section

Installing it properly,

Page

Page

.......5 Meeting electrical requirements............

6

Proper installation and electrical grounding is important for obtaining the best possible results

from your dehumidifier. This section tells you how to install your unit and how to connect it to

the proper electrical supply.

Installing it properly

^WARNING

Personal Injury Hazard

Because your dehumidifier weighs
between 50 lbs. (22.5 kg) and 75 lbs.

(33.75 kg), depending on the amount of

water collected in the pan, it is recom­

mended that you use proper lifting

techniques when lifting or moving your

unit.

Failure to do so could result in personal

injury.

1. Allow at least 12 inches (30.5 cm) of

space on all sides of the unit for good air
circulation.

2. Install the unit on a floor, table or shelf.

When installing the unit on a table or

shelf, be sure it is strong enough to
support the unit with a full pan of water.

A table or shelf may be a better position
from which to handle the water pan. Do

not sit or stand on this product. The height

of a table or shelf may help prevent icing

of coils due to colder air near the floor

(such as can be found in a basement).

3. Keep all outside doors, windows and other

openings closed when dehumidifier is
operating. Humid outdoor air will add to

the dehumidifier’s operating load.

Advertising
This manual is related to the following products: