Meeting electrical requirements, Observe all governing codes and ordinances, Do not, under any circumstances – Whirlpool AD050 User Manual
Page 6: Remove the power supply cord ground prong
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE USING YOUR DEHUMIDIFIER
4. The water pan must be properly
positioned, on the hangers inside the
cabinet, when dehumidifier is operating in
order for the automatic shut-off to operate
correctly.
5. Two rollers let you move the dehumidifier
easily. Remove the water pan, tilt the unit
forward and roll it to another position.
Meeting electrical requirements
OBSERVE ALL GOVERNING CODES AND
ORDINANCES.
Electrical ground is required on this
appliance.
A 115 volt, 60 Hz., AC only, 15 ampere
fused electrical supply is recommended.
(Time delay fuse or circuit breaker is recom
mended.) It is recommended that a separate
circuit serving only this appliance be pro
vided. Do not use an extension cord.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUND PRONG.
Recommended grounding
method
For your personal safety, this appliance
must be grounded. This appliance has a
power supply cord with a 3-prong grounding
plug. To minimize possible shock hazard,
the cord must be plugged into a mating
grounding type wall receptacle, grounded in
accordance with the National Electrical
Code (ANSI/NFPA 70, latest edition) and all
local codes and ordinances. If a mating wall
receptacle is not available, it is the responsi
bility of the customer to have a properly
grounded, 3-prong wall receptacle installed
by a qualified electrician.
3-prong
grounding
plug
3-prong
grounding
type wall
- — receptacle
Power supply cord
Grounding
prong