Using the oven controls, Baking – Whirlpool RB265PXV User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Oven Controls
Baking
The rack(s) should be placed so the
top of the food will be centered In
the oven. Always leave at least V
/2
to
2 inches (4-5 cm) between the sides
of the pan and the oven walls and
other pans. For more Information,
see the Cooking Guide.
1.
Position the rack(s) properly
before turning on the oven. To
change rack position, lift rack at
front and pull out.
2.
Set the Oven Selector on BAKE.
The "on" Signal Light will come on.
Set the Oven Temperature Control
to the baking temperature you
want. The “heating" Signal Light
will come on. The oven Is pre
heated when the “heating" Signal
Light first goes off.
4.
Put food in the oven. NOTE: Oven
racks, waiis and door wiii be hot.
During baking, the elements will
turn on and off to keep the oven
temperature at the setting. The
"heating" Signal Light will turn on
and off with the elements
The top eiement heips heat
during baking, but does not
Q turn red.
5.
When baking is done, turn
both
the Oven Selector and Oven
Temperature Oontrol to OFF The
"heating” and “on" Signal Lights
will go OFF.