C. Crane CCRadio SW - Manual (Page 17)

CCRadio SW Page 17
Features and Operation Explained — Front of Radio
The “SNOOZE” bar has two functions:
1) The “SNOOZE” bar is used to pause an alarm. See “SETTING THE ALARM” on page 11.
To snooze, press and release the “SNOOZE” bar [ on top of the radio, while the alarm
is going off. The alarm icon will flash on the display. Each time the “SNOOZE” bar is
pressed, the alarm will be paused for five minutes. You can snooze up to four times and
then the alarm will be automatically shut off.
2) When the radio is “off” but power is applied, pressing the “SNOOZE” bar [ turns off the
“beep” while using the “HOUR ” or the “MINUTE ” buttons. There is still a “beep”
when reaching the end of a radio band.
SNOOZE BAR
[
Press and release “LIGHT” bar to turn the LCD display light on for eight seconds. If you want
the display light to remain on, press and hold the “LIGHT” bar for 2 seconds or more. Press
and release the “LIGHT” button again to turn the LCD display light off.
LIGHT BAR
]
LCD DISPLAY
p
5
1) BATTERY Symbol
2) AC ADAPTER Symbol
3) SLEEP Timer/SNOOZE Status
4) KEY LOCK On/Off
5) ALARM Status and Type
6) Signal Strength Meter 7) MEMORY Location (1 - 10)
8) DIAL SPEED Indicators
9) FREQUENCY/CLOCK Display
10) DUAL TIME Indicator
11) Indicates BAND In Use
12) STEREO Reception
3 4 2
8
6 1
9
11
10
12
7
<
<