Whirlpool SF335ESR/ER - Manual (Page 20)

Changing the Oven Light
The oven light will only come on when you push the Oven Light switch on the
control panel. Push it again to turn off the light.
o
WARNING: To avoid
possible shock haz­
ard, turn off elecfric
power at the main
power suppiy.
2.
Remove the light bulb from its
socket. Replace the bulb with a
40-watt appliance bulb.
Turn the power back on at the
main power supply.
K you need service or assistance,
we suggest you follow these four steps:
L Before calling for
assistance...
Performance problems often result
from little things you can find and fix
without tools of any kind.
If nothing operates:
• is the range properly connected to
gas and electrical supplies? (See
"Installation Instructions"]
• Have you checked your home's
main fuses or circuit breaker box?
• Is the flow of combustion and/or
ventilation air to the range
blocked? Do not block the air flow
to and around the range.
• is the Oven Control turned to a tem­
perature setting or BROIL?
If burner falls to light:
• Is the range connected to electrical
power?
• Have you checked your home's
main fuses or circuit breaker box?
• Are burner ports clogged? (See
page 17.)
If burner flames are uneven:
• Are burner ports clogged? (See
page 17.)
If burner flames lift off ports, are
yellow, or are noisy when turned off:
• The air/gas mixture may be incor­
rect. (Call for service.)
If burner makes a popping noise
when ON:
• Is the burner wet from washing? Let
dry.
20